■ 喇叭單體 ＆ 單音箱型式
超低音單體　尺寸規格：(？吋) （Super Woofer Driver）	4 x 9吋
超低音單體 單體數量：(？支)
單體設計材質：（例：鋁製夾心圓錐）
主動式 or 被動式 系統
頻率響應　？Hz ~ ？kHz 數值範圍 ( Frequency Response )	13.5 Hz - 200 Hz
設計型式 1：低音反射式 / 密閉 氣墊式
設計型式 2：低音單體~正面發聲 / 低音單體~向下發聲
設計型式 3：✔ 推挽式
■ 擴大機功率 ＆ 頻率範圍調整 ＆ 輸出入端子
擴大機 輸出功率 ( RMS / 峰值 ) ？瓦	最大24bit/ 192 kHz，取決於輸入訊號 （支援32,44.1,48,96和192 kHz取樣率，類比運行頻率為192 kHz）
頻率響應　？Hz ~ ？kHz 數值範圍 ( Frequency Response )	頻率響應(+/- 3dB):15 Hz - 165 Hz
✔ 低通濾波 ( 連續可調 )
✔ 低通濾波 ( 使用 無線介面 App 調整 )
✔ 相位選擇
輸入端子：RCA x ？組 ／ 高電位 x ？組	類比和AES3數位輸入（無取樣率轉換）
輸出端子：RCA x ？組 ／ 高電位 x ？組
✔ 自動電源啟閉  　( Auto Power )
■ 外觀型式
外觀顏色 ( 表面材質處理 )
外觀尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm))	514 x 390 x 365 mm
淨重： 公斤　kg 數值 （ Net Weight / kg ）	48

•Dynaudio Core Sub 超低音喇叭 規格表

Dynaudio Core Sub 超低音喇叭

“Sub”的意思是：以15Hz的平坦響應向下挖掘，在13.5Hz處以6dB的滑落。Dynaudio在丹麥製作的音箱與最新的4顆低音單體和1000W的Pascal D類放大器結合，獲得一款性能突破的Core超低音喇叭。

Core Sub使用Core系列相同DSP引擎，可根據它放在房間裡的位置來自訂頻率響應。它的類比和AES數位輸入可以校準它，可以在任何配置下工作，從2.1聲道到劇院的多聲道系統。使用相同的電子平台為Core監聽喇叭系列，確保音色是相同的-你會得到一個完全整合的系統，不只是低音單獨的產品。可以堆疊更多並與其他Core產品結合使用。如果你想把它放在牆上，甚至可以使用VESA支架。它是混音搭配。例如：每側增加兩個Subs，其間有一個Core 47，調節dB並且所有都是對齊的 - 無論是物理還是聲音。

每個Sub提供120dB，與其他Core系列的電源完美結合。它也是多功能的 - 是數位和類比的，可以完美地對應任何Core監聽喇叭。

Core Sub有四個9吋側面手工製作的Dynaudio混合低音喇叭--Dynaudio的新型MSP +混合單體 - 主要由鋁製成，具有剛度，專為低音喇叭而設計。為了抵​​消鋁的振鈴，它採用雙動阻尼系統，將喇叭單體背面的紙張阻尼和Dynaudio自己的矽酸鎂聚合物材料結合在前面的阻尼帽中，確保最佳性能。這款單體是在備受好評的18s低音喇叭中找到的改進版本。任務很簡單; 使最好的低音喇叭成為可能。Core Sub是個高度精確的低頻系統。

特色

手工製作
在丹麥設計，開發，測試和製造。所有喇叭單體均由Dynaudio總部手工製作，每個喇叭在出廠前都經過單獨校準。

先進的材料
Core Sub使用新的Dynaudio MSP +混合喇叭單體 - 由MSP和鋁製成 - 專為超低音喇叭設計。雙動阻尼確保緊湊，可控制的超低音。

先進的DSP
使用與Core系列其他部分相同的DSP引擎 - 這樣就可以自定義其對房間位置的響應，實現無縫的一致性和系統整合。

方便連接使用
Core監聽喇叭可根據需要使用更多的超低音八 - 堆疊在整齊的陣列中，甚至可以安裝在牆壁上。

Core Sub
The pinnacle of depth

Core Sub
 
Core Sub is the ideal low-frequency extension for all speakers in the Core studio monitor range.

And when we say ‘low’, we mean it: it digs down with a flat response to 15Hz with a 6dB roll-off at 13.5Hz. There’s no meaningful low frequency that it won’t reproduce utterly faithfully.

Combine its handcrafted cabinet – made at our factory in Denmark – with four of our latest low-frequency drive units and 1000W of Pascal class-D amplification, and you get a subwoofer worthy of supporting the ground-breaking Core speakers.

Power? You’ve got it…
Core Sub uses the same DSP engine found in all the Core speakers, which means you can customise its response based on where it’s placed in the room. Its analogue and AES digital inputs let you calibrate it to work in any configuration from single-channel extension through 2.1-channel bass management and on to a theatrical LFE channel with the headroom to really nail it. Put your Cores in HP and you’re ready to go.

By using the same electronic platform as the rest of the Core products, we can ensure that the Sub’s behaviourand tonality are identical to the monitors – which means you get a totally integrated system, not a separate product just for bass.

It’s physically integrated, too. The design makes it possible to stack more units and combine it with other Core products. You can even use the VESA mount if you want to get it up on the wall. And it’s mix-and-match. For example: add two Subs per side with a Core 47 in between, regulate the dB and all is aligned – both physically and sonically. (Although we can’t promise your gold discs will stay in the same place on the wall.)

Dynaudio-Core-Master-Setup---Core-47-+-Core-Subs_1200x1200px
Finesse? That too…
Each Sub delivers 120dB, integrating perfectly with the power on offer from the rest of the Core series. It’s versatile, too – it’s digital and analogue, you can stack up to three together and on the top there are indentations to perfectly align any core monitors.

Core Sub has four 9in side-firing handmade Dynaudio hybrid woofers – Dynaudio’s new MSP+ Hybrid Drive units – which are made primarily from aluminium for stiffness, and are designed specifically for subwoofers. To counter ringing from the aluminium, it utilises a dual-action damping system that combines paper dampening on the back of the driver and Dynaudio’s own Magnesium Silicate Polymer material in a dampening cap on the front, ensuring the best performance. This driver is an improved version of the one you find in the highly acclaimed 18s woofer. The quest was simple; make the best bass driver possible.

Make no mistake: Core Sub isn’t just another boom-box. This is a highly accurate low-frequency delivery system.

Get ready to be moved. Literally.

Core Sub

Features
2022_Dynaudio_WebIcon_ConeGraphic_60x60px_Black
Hand-crafted
Designed, developed, tested and made in Denmark. All the drivers are hand-made at Dynaudio HQ, and each speaker is individually calibrated before it leaves our factory.

2022_Dynaudio_WebIcon_ConeGraphic_60x60px_Black
Advanced materials
Core Sub uses new Dynaudio MSP+ Hybrid Drive units – made with MSP and aluminium – designed specifically for subwoofers. Dual-action damping ensures tight, controlled bass.

2022_Dynaudio_WebIcon_ConeGraphic_60x60px_Black
Advanced DSP
Uses the same DSP engine you'll find in the rest of the Core range – so you can customise its response to its position in the room for seamless consistency and integration.

2022_Dynaudio_WebIcon_ConeGraphic_60x60px_Black
Mix-and-match
Use as many Subs as you need with your Core speakers – stack them in neat arrays or even mount them on walls. Core Sub aligns physically and electronically with your studio.

  回上一頁      回主選單