喇叭音箱及單體型式
喇叭型式種類 or 幾音路數值 ( Format / Audio path )	2音路2單體設計
超高音單　尺寸規格　　 ( Super Tweeter Driver )
高音單體　尺寸規格 ( Tweeter Driver )	0.75” (1.9cm) titanium dome
中高音單體　尺寸規格 ( Mid / Tweeter Driver )
中音單體　尺寸規格 ( Mid Driver )
中低音單體　尺寸規格 ( Mid / Bass Driver )
低音單體　尺寸規格 （Bass=Woofer Driver）	6.5” (16.5cm) mineral-filled poly cone
功率及頻率範圍
一般阻抗　Ω 數值 ( Impedance )	8 ohms
效率 / 靈敏度　dB數值 ( Sensitivity )	89 dB
持續 承受功率 "w" 數值 ( Sustained Power "watts = w" )
最大峰值 承受功率 "w" 數值 ( Maximum Power "watts = w" )
消耗功率
建議擴大機 功率瓦數範圍 ?~? w(瓦) RecommendedAmplifierPower	90 Watts
分頻點/分音器頻率？Hz/？kHz 數值 ( Crossover Frequencies )	2,500 Hz
頻率響應　？Hz ~ ？kHz 數值範圍 ( Frequency Response )	55–20,000 kHz
低頻延伸度　？Hz 數值 ( Bass Extension )
參數調整 ( Parameter Adjustment )
同軸式喇叭 特有規格
同軸式™　高音單體
同軸式™　低音單體 （或 中低音單體）
主動式喇叭 特有規格
高音擴大機功率　" 瓦特 " (Tweeter Power Amplifier "watts")
低音擴大機功率　" 瓦特 " (Woofer Power Amplifier "watts")
適用電壓 ( Applied voltage )
外觀型式
外觀顏色 ( 表面材質處理 )
外觀尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm))	28.3 x 20.6 x 8.8 cm
開孔安裝尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm))	25.7 x 18 cm
淨重： 公斤　kg 數值 （ Net Weight / kg ）	1.6 kg

•MARTIN LOGAN IW6 嵌入式揚聲器 規格表

MARTIN LOGAN IW6 嵌入式揚聲器

和居家裝潢完美融合
Martin Logan 旗下這款IW6嵌入式喇叭，外層採用無邊框薄型網罩，表面有非常細微的孔洞，而且還可以上漆處理，確保和牆面色系完全吻合，隱而不顯。

IW6IW6採用2音路2單體設計，搭載1只0.75吋鈦振膜半球高音，搭配磁流體散熱系統，強調能夠呈現柔和清晰的高音。另外再加上1只6.5吋礦物填充PP振膜中低音，配上配經過電腦計算優化的磁力引擎結構，可提供純淨清晰的中音以及良好的低頻延伸。原廠特別提到，IW6的分音器以手工製作而成，使用優質電容與空心線圈，並且採用Martin Logan獨家Vojtko拓樸結構，確保低失真以及單體銜接順暢。喇叭端子為彈簧式設計，可以接受較粗的喇叭裸線或是使用香蕉插端子。

Solutions Meet Performance
Manufactured to the highest standards of quality and performance, the new Installer Series by MartinLogan is a line of affordable, high-performance, ultra-low-profile custom installation in-ceiling and in-wall speakers. Featuring titanium dome tweeters and mineral-filled polypropylene drivers, each model comes with a remarkably robust mounting-lock system and paintable micro-perf, bezel-free grilles for a nearly invisible installation. Two all-weather models extended usage to high humidity areas. Pre-installation brackets are available for all models and square grilles are available for select in-ceiling models.

Titanium Dome Tweeters and Poly Cone Woofers
Titanium dome tweeters used throughout the Installer Series are ferrofluid damped and cooled for smooth high-frequency performance with amazing clarity across a wide listening area. Mineral-filled polypropylene cone bass/midrange drivers feature robust computer-optimized ferrite magnets and high-power motor structures to deliver detailed midrange performance and clean, extended bass response.

Micro-Perforated Grilles
Installer Series speakers feature ultra-low profile, paintable, micro-perforated grilles with no visible bezel for a near invisible integration into any wall or ceiling. A series of powerful magnets hidden inside the speaker quickly secure grilles into place, reducing the risk of warping or damage during installation. To match modern aesthetics, optional square grilles are available for most in-ceiling models (excludes all-weather versions).

Precision Crossovers
& Spring-Loaded Binding Posts
Carefully hand-built using only the finest polyester capacitors and air-core coils, Installer Series crossovers employ MartinLogan’s proprietary Vojtko topology for vanishingly low distortion and seamless driver integration. This precision-tuned network preserves even the most microscopic sonic nuances while handling the full dynamics of any source. Spring-loaded binding posts feature a larger wire access hole and connect via banana plug, pin, or 12AWG bare wire.

Robust Mounting-Lock System
A simple, yet robust mounting-lock system allows quick, trouble-free installation. Pocketed screw holes help hold the drill steady, making installation a snap. When not in use, mounting locks are held securely within a self-contained housing. When moved into place, they couple the chassis firmly to the ceiling or wall, increasing the rigidity of surfaces. If ever removed, the locks retract and latch back in their housings. Each speaker includes a full-size installation template featuring quick-reference instructions, and die-cut guides for marking the cutout hole.

  回上一頁      回主選單