線上刷卡分期
    
    公 告 事 項
營業時間:
______ 春節休假期間 ______
→ 2024-2-8 ~ 2024-2-20
■ 開工日期:2024-2-21 

_______ 上 班 時 段 _______
■ 週一 ∼ 週五
 am:11:00 ~ pm:10:00
■ 每 週 六 
 pm:1:30 ~ pm:10:00

地址:台北市 大同區 
     庫倫街 19號 1樓 

電話:(02)2596-6796 
    公 司 位 置
接近地標:
 本公司離下面地標距離:
 承德路 橡木桶:約 200公尺
 孔子廟:約 100公尺
 圓山捷運站:約 270公尺
 花博圓山館:約 350公尺 連結詳細資訊…
點此放大>>> GO

■音響器材維修保養,安裝服務! 連結詳細資訊…
點此放大>>> GO

  ■■■ 免 卡 分 期 ■■■ 連結詳細資訊…
點此放大>>> GO

■QED AIRLOC  ABS Standard Spade  喇叭 Y型叉 端子接頭 x 4
商品品牌:其他品牌    
商品型號:AIRLOC ABS Standard Spade (4顆 = 1組)
               (原廠:公司貨)
供貨狀況:商品資訊 ..... 可來電洽詢!
建議售價:NT$
網路售價:NT$

Airloc ABS Standard Spade
This Airloc ABS Standard Spade gives great performance for speaker termination

Using the latest Airloc technology, this Airloc ABS Wide Spade is the ideal speaker termination to ensure you get the best from your speaker cables. This spade has a dual opening for connection with speaker terminals up to 6mm and 8mm wide. FEATURES AND BENEFITS
-24k Gold plated
-High copper brass body
-AirlocTM cold weld system
-Fits 6 mm and 8 mm binding posts
-Minimum cable size 0.75 mm2
-Maximum cable size 5.5 mm2
-Accepts entire QED cable range
-Colour-coded ABS barrels
-Available in red, black, yellow and blue

WHAT IS AIRLOC
Airloc is a form of cold weld system that can be used to permanently attach QED Forte? banana plugs or spade terminals to our entire range of speaker cables.

One of the main reasons for choosing a QED speaker cable is the superior d.c. resistance characteristics offered by our exclusive use of 99.999% oxygen free copper conductors. It seems a shame then to ruin all this attention to detail by neglecting the most vulnerable area of the speaker cable chain - that of the physical interface between cable and amplifier or speaker terminals.

Seen under a microscope the surface of a typical copper strand is very rough and so using normal screw type terminals - as found on binding posts or cheap banana plugs - electrical contact is only made in a relatively small number of places. Add to this a layer of oxidation - which is inevitable if copper is exposed to the air for even a short time - and the combined resistance of the cable and its termination can creep back up to levels present in a more inferior cable.

By using a cold weld crimp type termination Airloc? plugs squash the conductors and plug together to improve contact area and reduce resistance.

As can be seen in the graph below, by the time the full pressure has been applied the resistance of the joint has reached a minimum value.

Now, because all the air has been removed from the joint there will be no oxidisation of the contact surfaces so the low resistance will remain for the lifetime of the cable. During the cold weld process the cable and plug become one solid piece of metal.