喇叭音箱及單體型式
喇叭型式種類 or 幾音路數值 ( Format / Audio path )
超高音單　尺寸規格　　 ( Super Tweeter Driver )
高音單體　尺寸規格 ( Tweeter Driver )	1.25" x 2.4" (3.2cm x 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm x 7cm) diaphragm.
中高音單體　尺寸規格 ( Mid / Tweeter Driver )
中音單體　尺寸規格 ( Mid Driver )	Two 3.5" (8.9cm) aluminum cone with stamped steel basket. Concave dust cap.
中低音單體　尺寸規格 ( Mid / Bass Driver )
低音單體　尺寸規格 （Bass=Woofer Driver）	Two 6.5" (16.5cm) aluminum cone with cast aluminum basket. Concave dust cap.
功率及頻率範圍
一般阻抗　Ω 數值 ( Impedance )	4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.
效率 / 靈敏度　dB數值 ( Sensitivity )	95 dB/2.83 volts/meter
持續 承受功率 "w" 數值 ( Sustained Power "watts = w" )
最大峰值 承受功率 "w" 數值 ( Maximum Power "watts = w" )
消耗功率
建議擴大機 功率瓦數範圍 ?~? w(瓦) RecommendedAmplifierPower	20-300 watts per channel
分頻點/分音器頻率？Hz/？kHz 數值 ( Crossover Frequencies )	400, 1,800 & 3,000 Hz
頻率響應　？Hz ~ ？kHz 數值範圍 ( Frequency Response )	42–25kHz ±3dB
低頻延伸度　？Hz 數值 ( Bass Extension )
參數調整 ( Parameter Adjustment )
同軸式喇叭 特有規格
同軸式™　高音單體
同軸式™　低音單體 （或 中低音單體）
主動式喇叭 特有規格
高音擴大機功率　" 瓦特 " (Tweeter Power Amplifier "watts")
低音擴大機功率　" 瓦特 " (Woofer Power Amplifier "watts")
適用電壓 ( Applied voltage )
外觀型式
外觀顏色 ( 表面材質處理 )
外觀尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm))	Height：70.5cm Width：21cm Depth：9.9cm
開孔安裝尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm))	Height：68.6cm Width： 19.2cm
淨重： 公斤　kg 數值 （ Net Weight / kg ）	8.62kg

•Martin Logan Edge 崁入式揚聲器 規格表

Edge 崁入式揚聲器

高性能和高功率處理能力，非常適合左/右或中心在牆的應用。

推出三款有史以來最雄心勃勃的建築揚聲器。每個揚聲器採用了我們低失真折疊運動?XT的高音單元，以及黑色的鋁，高偏移低音和中音驅動器，先進的拓撲結構分頻網絡與聚丙烯和低DF電解電容，定制繞線電感，並且熱和電流保護。優質的線材連接，光澤鋼琴黑色揚聲器擋板，隱藏所有的安裝硬件，固體單件鑄鋁底盤和表圈，弱磁性格柵把隱形系列中的一類自身。
高性能和高功率處理能力，非常適合左/右或中心在牆的應用。

Stealthy appearance, MartinLogan performance. An in-wall speaker that sounds like it isn't.
The world's most sophisticated and elegant architectural loudspeaker, Edge sounds so clean and dynamic, you'd think it were a superb standalone design. Not surprising, since it borrows so much from our own, including Folded Motion XT drivers and aluminum cone, high-resolution woofers. A rigid aluminum chassis and die-cast mounting locks enhance performance and ease installation, while an rotatable tweeter and bezel-less magnetic grille provide incredible adaptability into any installation.

The Pinnacle of Discreet High-Performance Audio
Introducing three of the most ambitious architectural speakers ever created; Axis, Edge & Vanquish, all part of the Stealth Architectural Series. Each speaker utilizes our larger, low distortion Folded MotionR XT tweeter, along with black-aluminum, high-excursion bass and mid-range drivers, an advanced topology crossover network with polypropylene and low-DF electrolytic capacitors, custom wound inductors, and thermal and current protection. Premium wire connections, a gloss piano-black speaker baffle that hides all mounting hardware, solid one-piece cast aluminum chassis and bezel-less magnetic grille put the Stealth Series in a class of its own.

Folded MotionR XT  Tweeters
The signature Folded Motion tweeters utilize extremely low mass diaphragms that "squeeze" air, and require significantly less excursion than the typical 1-inch dome tweeter, which drastically minimizes distortion while providing a lightning fast response time. The increased surface area also provides a wide, yet controlled sound dispersion to create a realistic and carefully etched sound stage.

The low distortion Folded Motion XT tweeter boasts a radiating surface 40% larger than those found in the award-winning MotionR Series products. This substantial leap in size increases the bandwidth and efficiency of the high-performance tweeter for effortless performance.

Design and Aesthetics
Stealth Series speakers are designed to disappear visually into the room, and each one has a completely bezel-less, low-profile, paintable grille for the ultimate stealth installation. Our in-house design and engineering team also minimized the grille's perforated metal holes to create a more discreet look, without compromising the quality of sound. A magnetic system secures grilles easily into place, reducing the risk of warping or damage during installation.

We've also refined the look underneath the grille for those who want to show off their high-performance in-wall or in-ceiling speakers. The driver complements are held securely in place by a flush mounted 3/4-inch solid, high-gloss piano black baffle that hides all mounting hardware.

Advanced Technology
Key to their sophisticated sound is an advanced topology Vojtko? crossover network. Each crossover is built on top of double-layered, super-thick, black PC boards and constructed with the highest-quality components. Internals including massive air-core coils, thick, high-purity 16-gauge copper wire, and low-distortion polypropylene capacitors ensure that every nuance of the audio signal is preserved.

Quick, Trouble-Free Installation

Critical to architectural products is their ease of installation. The Stealth Series continues MartinLogan's tradition of innovative engineering solutions which allow custom retailers to quickly and easily install their products. Each model features easy push style inputs and an extremely robust mounting-lock system that couples with the speaker's rigid aluminum chassis when installed. Axis and Edge in-wall models feature rotatable tweeters, which allows installers complete flexibility for both horizontal or vertical installation. Axis is sized to fit perfectly between standard 16-inch stud spacing for center channel applications.

Vanquish includes two toggle switches to tailor performance for whatever application is intended; either front left, front right, center channel, surround left or surround right.

  回上一頁      回主選單