• SS-6.2 參考規格
|
|
1對6 喇叭選擇器
* 內置的自動阻抗匹配電路
* 旁路模式可遠程可加音量開關
SS-6.2 6 Pair Single Source Impedance matching Speaker Selector
The SS-6.2 allows you to switch up to six speaker pairs connected to a stereo amplifier. Offering high-quality audio performance, it also provides overload protection and long-term reliability.
產品概述 PRODUCT OVERVIEW
The SS-6.2 offers two operating configurations: Impedance Matching and Bypass. Impedance-matching mode provides automatic overload protection for use even with high-power amplifiers. This mode allows multiple pairs of speakers to be safely connected to an amplifier using the built-in automatic impedance-matching circuitry.
Bypass mode is used for direct speaker switching with remote impedance-matching volume controls. This allows local control in each room as well as higher efficiency; however, in this mode the impedance matching and overload protection are not engaged.
Designed for use with 8-ohm loudspeakers, the SS-6.2 also provides safe connection to bridged amplifiers and even works in applications where there is a floating ground. It has spring-loaded speaker terminals for quick connection and can accommodate speaker wire up to 12 gauge.
特徵 features :
• Designed for quality audio performance and long-term reliability
• Impedance matching and automatic overload protection compatible with highpowered amplifiers
• Bypass mode for higher efficiency when using remote impedance-matching volume controls
• Isolated inputs provide safe connection to bridge or floating type amplifiers
• Spring-loaded speaker terminals accommodate up to 12-gauge wire
• Designed for use with 8 ohm speakers
Typical connections with external impedance matching (Impedance switch set to BYPASS)
Impedance matching volume controls are connected between the SS-6.2 and the speakers, providing external impedance matching. Impedance matching devices are required for all speakers regardless of ohm rating.
Typical connections with internal impedance matching(Impedance switch set to IN)
With internal impedance matching (impedance switch set to IN, speakers are connected directly to the SS-6.2 with no need for additional impedance matching volume controls.