•IRE-2 參考規格

1 對 2  IR發射器

The IRE-2 IR Emitter transfers infrared commands to a single audio-video component or other device.

產品概述 PRODUCT OVERVIEW

Its head attaches to the component’s IR sensor with an adhesive pad. The emitter’s cable plugs into an emitter jack on a CB-140 IR connecting block or multiroom controller or hub (also works with Russound SaphIR components). Color-coded connections with easy-to-use 3.5mm plugs (compatible with CB-140 connecting block) assure correct configurations and reduce the time on a job site.

A one-size fits all solution for any IR installation that works with LED, LCD and Plasma TV’s and is resistant to fluorescent and compact fluorescent (CFL) interference for reliable operation. Color-coded connections with easy-to-use 3.5mm plugs assure correct configurations and reduce the time on a job site.

The kit will work with all remote controls using carrier frequencies between 36kHz - 58kHz, including Philips RCMM IR Codes making it compatible with RCMM equipped devices such as those from AT&T U-verse and Sky TV.

特徵 features：

• 低調的設計，隱藏在視線之外

• 紅外阻擋罩可防止不必要的信號

• 即插即用彩色編碼連接，易於使用的3.5mm插頭

• 在需要的情況下，從前後發射IR以進行機櫃安裝

•  10'（3 m）電纜幾乎適用於任何組件設置

套件包含 Kit Includes：

•  One SLM-1 Slim-Design Surface Mount IR Receiver (x1)

Receive Frequency： 36 kHz to 58 kHz

Transmit Frequency： 40 kHz and 56 kHz

Power： 12VDC 500mA max

Dimensions： 2”W x 0.25”H x 0.5”D (50 x 6.3 x 13mm)

Cord Length：84” (2.1m)

•　One CB-PS 12VDC Power Supply

　　Power Output：12 VDC 500 mA regulated

•　Four IRE-1 IR Emitters

　　Dimensions：0.47”W x 0.35”H x 0.1”D (12 x 9 x 2.8mm)

　　Cord Length：120” (3m)

•　One CB-140 Connecting Block for One Receiver and Four Emitters

　　Dimensions：3.85”W x 1.57”H x 0.79”D

　　Weight： 6 oz (170.0g)

特徵 Features:

•　New slim design IR Receiver blends seamlessly on modern TV bezels

•　Matching low profile IR Emitter with front and rear IR output for mounting to a device or to an interior 　　　cabinet

•　Emitters include IR blocking covers to prevent unwanted signals

•　Plug and Play simplicity with easy-to-use color-coded connectors

•　IR Confirmation LED on the Connecting Block for system troubleshooting

套件組件 SLM-1K Universal Surface Mount IR Kit Components

SLM-1超薄設計表面貼裝紅外接收器

•　低調的設計與現代電視屏風無縫融合

•　使用易於使用的3.5mm插頭即插即用連接

•　通用LCD，LED，螢光和等離子體友善的設計

IRE-1紅外發射器（4組）

•　低調的美學設計與現代電子產品相融合隱藏在眼前

•　包括封蓋在內

•　使用易於使用的3.5mm插頭即插即用連接

•　根據需要從前後發射IR，進行機櫃安裝

CB-140紅外線連接塊

•　緊湊的設計，任何地點幾乎都適合

•　使用彩色編碼的3.5mm插孔即插即用，適用於所有IR連接

•　可擴展至多達8個可選IRE-2發射器的發射器

•　IR確認LED用於故障排除

CB-PS電源（CB-PS-EU歐式）

•　最大12VDC 500mA

  回上一頁      回主選單