• DTS1套組 參考規格

桌上型面板座

*桌上型空殼面板座

*適用搭配面板---MDK-C5

*顏色選擇: 白色 / 黑色

The DTS1 Desktop Stand is an accessory for the KLK-E5 and MDK-C5 keypads. It provides a standalone form to use the keypad “off the wall.”

產品概述 PRODUCT OVERVIEW

The DTS1 has a non-skid base and weighted body to keep the unit steady during keypad use. It includes a terminated CAT-5 cable that attaches to the keypad’s controller port. A patch cable (not included) connects an RJ45 port on the back of the DTS1 to a keypad port on the controller.

注意事項 Considerations:

• The AUX port on the KLK-E5 is unavailable when the keypad is installed in the DTS1.

• The External IR Input connector on the KLK-E5 and MDK-C5 is unavailable for use with the DTS1.

• The DTS1 stand with an installed keypad is designed to be placed on, and operated from a flat level surface such as a countertop, end table or nightstand. It is not meant to be a portable device, and should not be picked up and hand-held during use or carried from place to place.

• The DTS1 requires a CAT-5 patch cable to connect it to the controller. This patch cable should be cut to fit the installation, and be kept away from foot traffic areas so it is not walked on or tripped over.

• The stand with keypad is for inside use only and must be protected from the weather. Do not use near or in water, such as a hot tub, kitchen sink or master bathroom.

  回上一頁      回主選單