•BTC-1X 參考規格
|
|
藍牙遠程收發器
* 通過 CAT-5e 安裝顯著延長藍牙範圍
* APTX更高分辨率的藍牙音頻編解碼器
* 自定義命名和密碼,便於識別和安全連接
* 可適用 MCA 系列主機 及 BSK1 使用
BTC-1X Bluetooth Remote Transceiver
BTC-1XBluetooth®模塊是一種收發器,可讓您將便攜式媒體播放器,智能手機或其他配備藍牙的設備無線連接到任何Russound MCA系列控制器。
產品概述 PRODUCT OVERVIEW
It transmits balanced line audio to the XStream Bluetooth input. The BTC-1X also supports the aptX codec, providing enhanced audio quality that is far superior to standard Bluetooth audio.
The BTC-1X can be installed anywhere and can extend Bluetooth reception beyond the normal limits. It can even be programmed with a custom passcode and room name for easy identification when more than one is installed in a home, using only a USB cable and a free software download.
Like all Russound Local Source Modules, the BTC-1X can be set to automatically interrupt an active audio signal. It integrates easily with the MCA-Series controller via a dedicated CAT-5 connection. No other connection or power supply is required.
主要功能 Key features include:
• Installs via a single CAT-5e up to 300' (91.4m) away from the MCA-Series Controller
• Adds a Bluetooth streaming source connection
• Dramatically extends Bluetooth range up to 49'
• aptX® audio codec for enhanced sound quality
• Custom Naming and Passcode for easy identification and secure connections
重要注意事項 Important Considerations
• 斷開電源線與Russound控制器的連接在與BTC-1X進行任何連接之前。
• 驗證所有連接是否正確和極性連接器是正確的。按照T568A連接所有RJ-45連接如圖所示。
• 將所有電源線遠離所有信號線防止嗡嗡聲引起的噪音。
• 如果必須穿過電源線,請在90度進行並且不要彼此平行地運行電纜。如果平行行駛,請保持距離12“避免CAT-5電纜引起的噪音。
• 選擇可靠的信號線和/或跳線。