•B-800MK3參考規格
|
|
Densen 賦予 B-800MKⅡ極為靈敏的接收能力,因此訊號相對微弱的電台也能接收,方便的是,B-800MKⅡ的背面備有切換開關,可以調整它的接收靈敏度,方便用家自動過濾訊號過弱的電台。另外,B-800MKⅡ的頻率掃瞄幅度也可以透過背板調整,讓操作更為簡便。
在電路設計方面,B-800MKⅡ的放大線路仍舊採取 Densen 一貫的純 A類無負迴授設計,並使用精密度極高的雷射切割電阻、訂製電容與變壓器。此外,B-800MKⅡ也提供了升級選項,用家在未來可以直接加入 DAB 數位廣播接收的功能,不僅讓音質更為提升,音樂來源也更加廣泛。
When Densen launched its B-800 FM tuner, it became an instant hit, receiving several awards over the years, and becoming a hit for Densen. In generation 2 the B-800 was upgraded with RDS. Now with 3 generation Densen has improved the design in several important areas, to perfect the performance even further.
As usual for a Densen design, everything is designed inhouse by Densen, and no external consultant has been used. This is a part of a clear strategy for Densen to have all competences in house.
In the B-800mk3 the frontend is a completely new design, which are hand calibrated before each unit leaves the Densen factory. Further to that the user can calibrate the front end in 2 steps, to match it perfectly for various signal levels.
Internally the front end is encapsulated, to avoid high frequency interference with the delicate audiocircuits. The powersupply contains a custommade transformer, and Densens own capacitors with a total capacity of 20.000uF making the B-800mk3s powersupply rather unusual for a tuner. Further to this, the B-800mk3 contains the possibility of upgrading with Densens DNRG external powersupply.
B-800mk3 contains the possibility of upgrading with a DAB module, however Densen has decided not to launch such a module at present, since Densen Head Honcho Thomas Sillesen simply things DAB sounds to poor..
Seen from the outside the B-800mk3 can give the impression of a simple tuner with an easy userinterface, however under the skin, the B-800mk3 contains several advanced features, that allow the user to adjust search level to choose the minimum level of signal quality of stations the tuner should stop at and DX/local adjustment and gain level on the frontends input. Most of these features can be adjusted on the back of the B-800mk3, as the front only contains the primary adjustments. However the gain of the frontend is adjusted by Densens unique Gizmo remote.
Since Densen have designed all in the B-800mk3 themselves, the software can be upgraded if the function of the B-800mk3 is altered.
The analogue stages, have had Densens strong focus, and as usual for a Densen design, they are class A stages with no feedback at all. Compared to the earlier incarnations of the B-800, the new circuits are further refined, and as a result, the B-800mk3 has an even more transparent and dynamic sound than the older incarnations, while preserving the strong detaillevel, precise soundstage, and generally musically performance.