後級輸出 功率放大 聲道數量 ＆ 每聲道阻抗 Ω 換算 瓦特(w)值 規格
擴大機 音場聲道組數 ● 範例： 　5.1／7.1／9.2／11.2 　5.1.2／5.1.4／7.1.2／7.2.4 ● 註解： 小數點後1位數為超低音組數！ 小數點後2位數為天空聲道組數！
每一聲道 額定功率瓦特數 Ｗ： （ 阻抗：歐姆 = Ohm = Ω ） 依照各廠商提供之規格內容記載
前方面板 影音輸出／入端子
✔ HDMI 支援輸入
✔ USB 支援
✔ "耳機"輸出連接孔 ( Phones )
✔ 自動音場校調系統   　 Mic 連接孔 ( MCACC )
✔ AV RCA 複合式 影音輸入端子 　（ 黃,白,紅 or 全黑）
後方背板 影音輸入端子
HDMI  影音輸入端子 組數
色差影像 輸入端子 組數 紅,藍,綠 3色（Component）
AV 複合式 影像輸入端子 組數 黃色端子（Composite Video）
類比聲音端子／紅,白 端子 組數  （Analogue Audio）
✔ 類比複合式 多聲道聲音輸入 　 紅,白 端子 　（Multi  Ch  In／Pro  In）
✔ 黑膠唱盤 聲音輸入端子  　( Phono ( MM / MC ) )
數位光纖 輸入端子 組數  ( Digital Optical In )
數位同軸 輸入端子 組數 黑or橙色端子( Digital Coaxial )
✔  數位 USB 解碼 輸入連接孔 　六角形接頭（USB DAC IN）
後方背板 影音輸出端子
HDMI 影音監控輸出 組數 ( HDMI  Monitor  Out )
色差影像 輸出端子／紅,藍,綠  3色端子 組數（Component）
✔　AV 複合端子 影像輸出 　　黃色端子 ( Monitor Out )
✔　類比複合式 多聲道聲音輸出 　　紅,白 端子 （Multi  Ch  Out／Pro  Out）
✔　超低音 輸出端子   　　(SBU／SUBWOOFER／SW)
✔　分區輸出：前級 Zone 2 　　（Pre  Out）
✔　分區輸出：前級 Zone 3 　　（Pre  Out）
✔　分區輸出：後級 Zone 2 　　（Power  Out）
✔　分區輸出：後級 Zone 3 　　（Power  Out）
其他周邊資訊
✔　調幅 AM 收音機天線   　　( AM Tuner Antenna )
✔　調頻 FM 收音機天線   　　( FM Tuner Antenna )
✔　USB Port　背板連接端子
✔　RS-232C　連接埠
✔　遙控連結控制 輸入  　　(IR  Remote Control In )
✔　遙控連結控制 輸出   　　( Remote Control Out )
✔　觸發啟動控制 12伏特 輸出 　　（Trigger  Out  12V）
✔　遙控器：█ 標準型  ● 學習型
有線 ／ 無線網路 ＆ 影音相關 軟體支援
✔　杜比全景聲　"天空聲道 " 　　( Dolby Atmos )
✔　Wi-Fi 無線網路 連結功能   　　( Wireless Direct )
✔　乙太 有線網路 連結功能 　 ( Ethernet ／ LAN ／ RJ45 ）
✔　"藍芽" 無線功能  Bluetooth   　相容支援 無線音樂串流功能
✔　AirPlay　*音樂串流  　相容 AV Controller app 軟體
✔　Spotify®　*音樂串流  　相容 AV Controller app 軟體
✔　Play - Fi　*音樂串流  　相容 AV Controller app 軟體
其他規格
✔　適用台灣電壓 　( Applied Voltage／Taiwan )
消 耗 功 率
外觀尺寸 ( 寬 × 高 × 深 mm） ( Dimensions ( W×H×D mm))	440 x 64 x 310 mm
重量： 公斤 kg	14

•B-150XS參考規格

The new reference integrated amplifier from Densen is perhaps the most advanced integrated amp on the market. It is filled with advanced solutions, which all share the goal of giving you even more musicality and flexibility.

The volume is controlled by an extremely precise attenuator made of Vishay metal film resistors, which is switched by relays controlled by the microprocessor. Compared to a normal volume potentiometer of the kind used in the majority of all preamps, the resistor network has virtually no self induced noise and an extremely low distortion. This results in an unsurpassed precision and refinement, and the attenuator contains no less than 200 steps! This makes it possible to adjust the volume very precisely (0.5 dB) even when the sound is so low that an ordinary volume control would create an uneven balance between left and right.

The B-150XS output stage utilizes Densen’s unique ”DMCD” (Densen Mass Current Distribution) technology. The B-150 is, as with all other Densen amplifiers, The DMCD technology also secures an extremely firm grip on the speakers combined with a fast, precise and truly transparent sound. As the B-150XS is a wide bandwidth design it goes to 400.000Hz, resulting in improved slew-rate.

The B-150XS is built using surface mounting techniques, and the components are mounted with a precision of 0.02mm (!) using silver solder. All solderings are made in an artificial atmosphere, consisting of nitrogen, to avoid oxidation of the solderings. The power supply is massive, consisting of a 750VA transformer and having a storage capacity of 130.000uF with 4 separate rectifiers, two of which are capable of 3.000VA. Unusually for an amplifier, not all of the capacitors are mounted in a capacitor bank, as some of them are located directly adjoining the output stage for faster power delivery. All resistors are laser trimmed metal film from Vishay with a precision of 0.1%. The B-150XS delivers 100W in 8 ohm and 200W in 4 ohm.

The transformer is custom-made for the B-150XS, and is winded using a new technique. This technique reduces vibration from the transformer and therefore reduces mechanical noise from the cabinet. At the same time, this prevents mechanical vibrations from reaching the delicate audio signals on the PCB. It also works as an isolation transformer, thereby eliminating the need to use separate power conditioners.

The special winding techniques used also ensure that the transformer modulates less than is normal (for other amplifiers) during the delivery of large amounts of current. Transformers normally lower the voltage during the delivery of large amounts of current which results in compression of the signal’s dynamics. As a result of the new winding method the transformer in the B-150XS is extremely stiff, which means that the voltage does not drop under large current deliveries.

The printed circuit board is made of Teflon, and is double sided to allow for the signal on one side and the ground plane on the other, thereby optimising interference free signal transfer.

The B-150XS contains sockets for the SB Board for surround, DP-03 and DP-06 MM and MC stages. There is also the possibility of upgrading the B-150XS with the DNRG external power supply to further enhance the sound quality, so as to experience truly breathtaking musical experiences. The B-150XS is also prepared for the SAXO electronic crossover, so that the B-150XS can be used in active systems. This is done by mounting the crossover internally in the B-150XS in a socket. The SAXO crossover will fit all passive speakers on the market.

The DenLink system implemented in all Densen products allows 2-way communication in multiroom installations. On the B-150XS, the link system will allow the user to power up a link amplifier in the kitchen, or another room, and then control the main system in for example the living room, sending the signals to and from the kitchen, for playback in another room. It will be possible to have full display information in another room, with status on all products. The DenLink / Multiroom system is also prepared for controlling the lights, so you will be able to dim them.

Reviews

"Positively speaking, Densen is selling cheats" - 6moons

"Aesthetics and functionality are simply sublimated perfectly"  - 6moons

"Yet over the Densen duo nothing defaulted into aural rejects." Whomever

"That the low bass causes no structural damage" whatever HiFi

UPGRADES

Densen products are not only built to last; they’re also built to be upgraded along the way. Nearly all our amps, CD-players and tuners have been prepared for upgrades, so you can improve and expand your musical experiences at a favourable price and without compromising on design, build quality and sound. You can start out with a very simple system and end up with a high-end active system, just by upgrading.

External power supplies

The Densen NRG upgrades, are external powersupplies designed to significantly upgrade and improve the performance of Densen products.

It is a effective way of improving the sound, without having to sell your current Densen model, and purchase a larger. A discrete and elegant cure for the ever continuing lust for even better sound from your Densen system.

Comes in 2 versions - DNRG and 2NRG.

DAC Board

The Densen FabelDAC is a DAC designed to be mounted in the surround slot on Densen Preamps or Integrated amps. It is bacically the DAC from the B-410 with 2 coax digital inputs. It will allow the connection of a digital source directly to a Densen integrated amp/preamp.

FabelDAC gives a fantastic performance for a rather modest price, and allows the use of digital sources like Sonus or Squeezebox or other digital sources you might want to listen to.

RIAA Board

The DP-03 is an MM board for the B-150XS. The only difference between the DP-01 and DP-03 is the physical shape, which allows them to be used with different Densen products. Despite of the modest price of these two boards, it will offer you a world class RIAA when mounted in any Densen amplifier. Due to the technical design, the DP-03 and DP-01 work with all MM cartridges on the market, and actually do so with an outstanding sound quality.

Read More

Surround Board Upgrade

The SB boards (Surround Boards) are a revolution for new features. The SB boards are add-on boards for all integrated and pre-amplifiers (except the B-200). This is a very easy and sonically superior way to enter the world of home cinema or Super Audio systems. All our products are supplied as dedicated 2-channel products, but with the SB boards you get analogue 5.1 and 7.1 line input and 5.1 and 7.1 line pre-out. This means that you can easily connect a DVD-player or SACD-player with 5.1 analogue out. If you have a system consisting of a pre-amp and 2-channel power-amp, the SA boards let you connect a B-340 (4-channel amplifier) and then have 6-channels (5+1) of high grade amplification. The SB boards are available in 2 versions. The features are the same, only the sound quality differs. The SB-1 is the entry-level version, while SB-2 is the true high-end solution.

  回上一頁      回主選單