喇叭音箱及單體型式
喇叭型式種類 or 幾音路數值 ( Format / Audio path )	2-driver, 2-way in-wall / in-ceiling, IRP™ chassis / spring clamps
超高音單　尺寸規格　　 ( Super Tweeter Driver )
高音單體　尺寸規格 ( Tweeter Driver )	25-mm (1 in) silk dome
中高音單體　尺寸規格 ( Mid / Tweeter Driver )
中音單體　尺寸規格 ( Mid Driver )
中低音單體　尺寸規格 ( Mid / Bass Driver )	140-mm (5-1/2 in) mineral-filled polypropylene cone
低音單體　尺寸規格 （Bass=Woofer Driver）
功率及頻率範圍
一般阻抗　Ω 數值 ( Impedance )	Compatible with 8 ohms
效率 / 靈敏度　dB數值 ( Sensitivity )	88 dB / 84 dB
持續 承受功率 "w" 數值 ( Sustained Power "watts = w" )
最大峰值 承受功率 "w" 數值 ( Maximum Power "watts = w" )
消耗功率
建議擴大機 功率瓦數範圍 ?~? w(瓦) RecommendedAmplifierPower	15-70 watts
分頻點/分音器頻率？Hz/？kHz 數值 ( Crossover Frequencies )	2rd-order electro-acoustic at 2.5 kHz
頻率響應　？Hz ~ ？kHz 數值範圍 ( Frequency Response )	頻率響應 On-Axis：±2 dB from 70 Hz - 20 kHz 頻率響應 30° Off-Axis：±2 dB from 70 Hz - 18 kHz
低頻延伸度　？Hz 數值 ( Bass Extension )	60 Hz(DIN)
參數調整 ( Parameter Adjustment )
同軸式喇叭 特有規格
同軸式™　高音單體
同軸式™　低音單體 （或 中低音單體）
主動式喇叭 特有規格
高音擴大機功率　" 瓦特 " (Tweeter Power Amplifier "watts")
低音擴大機功率　" 瓦特 " (Woofer Power Amplifier "watts")
適用電壓 ( Applied voltage )
外觀型式
外觀顏色 ( 表面材質處理 )	White, paintable
外觀尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm))	266mm (Height) x 186mm (Width)
開孔安裝尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm))	233mm (Height) x 153mm (Width)
淨重： 公斤　kg 數值 （ Net Weight / kg ）	1.7g

•PV-150 技術規格

Behind Every Good Speaker

… lies a good design! While many in-wall / in-ceiling speakers may look good, it’s what’s behind the speaker that counts! The design and technology … the stuff you can’t see, but if not ‘done right’ results in a poor-sounding speaker. Behind every PV speaker is a combination of design, technology and engineering that is simply unheard of in this entry-level segment of the market. In fact, PV speakers take our industry-leading Performance and Value to an entirely new level.

Textured Pure Silk Domes with ferro-fluid cooling and damping promote clear and well-extended high-frequency response, superb transparency and a tremendous spaciousness.

Mineral-Filled Polypropylene Cones deliver natural, detailed midrange performance in addition to smooth, well-articulated and well-extended bass response.

Rigid IRP™ Injection-Molded Ribbed Polymer Chassis.

Easy Installation! Unique hidden spring clamps make installation a snap!

A word about Paradigm Fireproof Backboxes

Paradigm in-wall applications can now be spec’d for MDU applications.

Paradigm backboxes meet the following:
• ‘One-Hour Fire-Rating’ requirements
• ‘For Use in Air Handling Spaces’ requirements

Paradigm backboxes will contain fire, gas, smoke and heat within the enclosure for up to one hour. Paradigm backboxes also meet the following codes:
ASTM E119-98 Vertical
ASTM E119-98 Horizontal
UBC 7-1
UL 2043
CAN/ULC S101-M89

  回上一頁      回主選單