英國 TANNOY 揚聲器
 喇叭音箱及單體型式 | |
| 喇叭型式種類 or 幾音路數值 ( Format / Audio path ) | 2-driver, 2-way in-wall, ABS chassis & mounting clamps |
| 超高音單 尺寸規格 ( Super Tweeter Driver ) | |
| 高音單體 尺寸規格 ( Tweeter Driver ) | 3/4" (1.9cm) PTD™ dome |
| 中高音單體 尺寸規格 ( Mid / Tweeter Driver ) | |
| 中音單體 尺寸規格 ( Mid Driver ) | |
| 中低音單體 尺寸規格 ( Mid / Bass Driver ) | 6.5" (16.5cm) mineral-filled polypropylene cone |
| 低音單體 尺寸規格 （Bass=Woofer Driver） | |
| 功率及頻率範圍 | |
| 一般阻抗 Ω 數值 ( Impedance ) | Compatible with 8 ohms |
| 效率 / 靈敏度 dB數值 ( Sensitivity ) | 89 dB / 85 dB |
| 持續 承受功率 "w" 數值 ( Sustained Power "watts = w" ) | |
| 最大峰值 承受功率 "w" 數值 ( Maximum Power "watts = w" ) | 60 W |
| 消耗功率 | |
| 建議擴大機 功率瓦數範圍 ?~? w(瓦) RecommendedAmplifierPower | 15-90 W |
| 分頻點/分音器頻率？Hz/？kHz 數值 ( Crossover Frequencies ) | 2nd-order electro-acoustic at 2.5 kHz |
| 頻率響應 ？Hz ~ ？kHz 數值範圍 ( Frequency Response ) | 頻率響應 On-Axis：±2 dB from 75 Hz - 20 kHz 頻率響應 30° Off-Axis：±2 dB from 75 Hz - 18 kHz |
| 低頻延伸度 ？Hz 數值 ( Bass Extension ) | 55 Hz |
| 參數調整 ( Parameter Adjustment ) | |
| 同軸式喇叭 特有規格 | |
| 同軸式™ 高音單體 | |
| 同軸式™ 低音單體 （或 中低音單體） | |
| 主動式喇叭 特有規格 | |
| 高音擴大機功率 " 瓦特 " (Tweeter Power Amplifier "watts") | |
| 低音擴大機功率 " 瓦特 " (Woofer Power Amplifier "watts") | |
| 適用電壓 ( Applied voltage ) | |
| 外觀型式 | |
| 外觀顏色 ( 表面材質處理 ) | |
| 外觀尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm)) | 283 mm Height / 206 mm Width |
| 開孔安裝尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm)) | 257 mm Height / 180 mm Width |
| 淨重： 公斤 kg 數值 （ Net Weight / kg ） | 1.6 kg |
•CI Home H65-IW 技術規格
|
|
|||||||||||||||||||||||||||||||||||
Quick Specs
- In-wall applications.
- 3/4" PTD™ dome tweeter.
- 6.5" mineral-filled polypropylene bass/midrange driver with oversized computer-optimized ferrite magnets.
- Bezel-Free Micro-Perf Grille.
Your “Go-To” Custom Install Speaker.
The CI Home™ series address the important considerations when selecting custom installation speakers: truly superior sound, easy installation, and a new bezel-free micro-perf grille with an incredibly discreet aesthetic.
High-Quality Components Make An Audible Difference
- Superior PTD™ Pure-Titanium
Tweeter Domes are Ferro-fluid damped
and cooled to ensure smooth
high-frequency performance with
amazing clarity across a wide listening area. - Pocketed screw holes help to hold the drill steady, making installation a snap.
- Easy-access Binding Posts feature a larger wire access hole and connect via banana plug, pin or bare wire.
- Rigid ABS clamps cut down on installation time and simplifying installation.
- Superior Mineral-Filled Polypropylene Bass/Midrange Cones with oversized computer-optimized ferrite magnets and
high-power motor structures deliver detailed midrange performance with clean, extended bass. Even movie dialog is incredibly clean and clear. - NEW Bezel-Free Micro-Perf Grilles.
- Magnetically attached grilles: neodymium magnets hold grilles firmly in place.
- No masking required—this makes the grilles faster and easier to paint, if painting is desired.
A Behind-the-Ceiling Look at Our ABS Clamps
Without any unnecessary pressure or force, each turn of the screwdriver turns the clamp. We show the starting point, we show the screwdriver working to turn the clamp, and finally, we show the speaker locked into place inside the wall or ceiling. It doesn't get simpler or easier!
A Solid Installation
Our High-Strength ABS Chassis and Clamp System
addresses the flexibility problem that plagues all walls and ceilings. ABS stiffness combats unwanted resonances and vibrations and equally important, the new clamp design makes the installer's job easier and faster!
回上一頁
回主選單
