Contour ＆ Focus 系列
 喇叭音箱及單體型式 | |
| 喇叭型式種類 or 幾音路數值 ( Format / Audio path ) | |
| 超高音單 尺寸規格 ( Super Tweeter Driver ) | |
| 高音單體 尺寸規格 ( Tweeter Driver ) | |
| 中高音單體 尺寸規格 ( Mid / Tweeter Driver ) | |
| 中音單體 尺寸規格 ( Mid Driver ) | |
| 中低音單體 尺寸規格 ( Mid / Bass Driver ) | |
| 低音單體 尺寸規格 （Bass=Woofer Driver） | |
| 功率及頻率範圍 | |
| 一般阻抗 Ω 數值 ( Impedance ) | 4 Ohms |
| 效率 / 靈敏度 dB數值 ( Sensitivity ) | 88 dB (2,83 V/1 m) |
| 持續 承受功率 "w" 數值 ( Sustained Power "watts = w" ) | 150 W |
| 最大峰值 承受功率 "w" 數值 ( Maximum Power "watts = w" ) | |
| 消耗功率 | |
| 建議擴大機 功率瓦數範圍 ?~? w(瓦) RecommendedAmplifierPower | |
| 分頻點/分音器頻率？Hz/？kHz 數值 ( Crossover Frequencies ) | |
| 頻率響應 ？Hz ~ ？kHz 數值範圍 ( Frequency Response ) | 45 Hz – 23 kHz (± 3 dB) |
| 低頻延伸度 ？Hz 數值 ( Bass Extension ) | |
| 參數調整 ( Parameter Adjustment ) | |
| 同軸式喇叭 特有規格 | |
| 同軸式™ 高音單體 | |
| 同軸式™ 低音單體 （或 中低音單體） | |
| 主動式喇叭 特有規格 | |
| 高音擴大機功率 " 瓦特 " (Tweeter Power Amplifier "watts") | |
| 低音擴大機功率 " 瓦特 " (Woofer Power Amplifier "watts") | |
| 適用電壓 ( Applied voltage ) | |
| 外觀型式 | |
| 外觀顏色 ( 表面材質處理 ) | |
| 外觀尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm)) | 225 x 325 mm |
| 開孔安裝尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm)) | 194 x 295 mm |
| 淨重： 公斤 kg 數值 （ Net Weight / kg ） | 3 kg |
•Dynaudio IP 17 In-wall loudspeaker
| 靈敏度 | 88 dB (2,83 V/1 m) |
| 長期承受功率 | 150 W |
| 頻率響應 | 45 Hz – 23 kHz (± 3 dB) |
| 阻抗 | 4 Ohms |
| 尺寸 | 225 x 325 mm |
| 開孔尺寸 | 194 x 295 mm |
| 重量 | 3 kg |
Dynaudio IP 17 in-wall loudspeakers
IP 17 的機械結構和傳統的崁入揚聲器有很大的區別。堅固的鋁框架、 MDF 障板、特製的分音器和獨特的單體都體現著Dynaudio的超高品質。即使IP 17從您的視線中隱身（其框架和面網都可以上漆），它的聲音品質也會讓他倍受矚目。
The IP 17 is the ideal combination of superb performance matched with compact dimensions.
Just as the larger model IP 24 the mechanical construction is unusually highly sophisticated: An extremely sturdy die-cast aluminum frame with a baffle made from resonance-absorbing MDF and rigid aluminum screw clamps, provide a firm foundation for the integrated loudspeaker technology. The negative impact from unwanted resonances -so typical for the more common light-weight plastic assemblies- is thus effectively eliminated.
The cone material for the IP 17 woofer is made from Magnesium Silicate Polymer (MSP). Just as typical for Dynaudio is the shape of the cone which has been optimized for perfect sound dispersion in a room.
In combination with the unusually large but extremely light-weight aluminum voice-coil and a very powerful magnet system, the speaker will follow the music signal with great precision. The specially coated soft-dome tweeter remains free of distortion or edginess at even very high frequencies. The sophisticated crossover with its three-way adjustable tweeter level ensures an ideal match with the listening environment.
Pre-Construction Brackets are available to better facilitate new construction installations of Dynaudio IP 17 and IP 24 Inwall models, by working both as a template as well as a structural support for the installation.
回上一頁
回主選單
