•8000S產品規格表
|
Rated output power (both channels driven) |
60 W per channel into rated load impedance (8 W)
95 W into 4 W and 130 W into 2 W for short periods |
|
Typical output power (both channels driven) |
72 W per channel into rated load impedance (8 W)
115 W into 4 W and 150 W into 2 W for short periods |
|
Preamplifier input impedance |
20 kW nominal |
|
Preamplifier input level |
175 mV rms
(relative to 0.5 V rms preamplifier output) |
|
Preamplifier Gain |
9 dB at 1 kHz |
|
Preamplifier Signal to Noise |
Greater than 80 dB (relative to 0.5 V rms preamplifier output) |
|
Preamplifier output impedance |
100ohms nominal |
|
Preamplifier maximum output |
Greater than 7.76 V rms |
|
Record output impedance |
1 kohm nominal |
|
Record output gain |
0 db (i.e. the record output level is the same as the input level) |
|
|
|
Power Amplifier Input impedance |
47 kohms nominal |
|
Power Amplifier Input level |
782 mV rms (for full rated output) |
|
Power Amplifier Gain |
29.0 dB at 1 kHz |
|
Power Amplifier Signal to Noise |
Greater than 80 dB (relative to 0 dBW) |
|
Frequency response (-3 dB) |
1 Hz - 65 kHz |
|
Frequency response (20 Hz - 20 kHz) |
� 0.5 dB |
|
Total Harmonic Distortion + Noise |
Less than 0.07% |
|
Channel separation |
Greater than 60 dB at 1 kHz |
|
Crosstalk rejection |
Greater than 80 dB at 1 kHz |
|
Polarity |
Non-inverting for all inputs and outputs |
|
Headphone output impedance |
330W (suitable for headphones of 8 W to 2 kohms impedance) |
|
Power Supply |
220 - 240 V 50/60Hz |
|
Power Consumption |
Less than 300 W |
|
Dimensions |
Wide 445mm
Height 75mm
Depth 350mm |
|
The AUDIOLAB 8000S
Remote control
Headphone socket
Digitally-controlled muting
Gold-plated relay contacts
Toroidal power transformer
'Straight Line Technology'
Gold-plated phono connectors
Six line level inputs and three tape loops
Class A preamplifier with dual output
Proprietary Sorbothane� sonic isolation feet
60 W per channel into rated load impedance (8 Ω),
95 W into 4 Ω and 130 W into 2 Ω for short periods
Ability to record one input while listening to another
Relay-switched independent pre- and power amplifier sections
Duplicated loudspeaker terminals for bi-wired speakers, multi-room or multi-zone applications
Audio Refinement
回上一頁
回主選單