主路徑
MAIN PATH
(RCA and XLR Outputs) |
| Frequency Response and Bandwidth |
Analog Direct Inputs:
10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 130 kHz (+0 -3 dB) |
Analog-DSP Inputs at 24/96:
10 Hz to 20 kHz (+0 -0.3 dB), 2 Hz to 44.1 kHz (+0 -3 dB) |
Digital Inputs at 24/96:
10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 45 kHz (+0 -3 dB) |
| THD+N (at Rated Input and Output) |
Analog Direct Inputs:0.006% (80 kHz BW) |
| Analog-DSP Inputs at 24/48 or 24/96:0.004% (AES17 Filter) |
| Digital Inputs at 24/48 or 24/96:0.004% (AES17 Filter) |
| IMD (CCIF at 15 kHz and 16 kHz) |
Analog Direct Inputs:<0.001% |
| Analog-DSP Inputs at 24/48:0.001% |
| Digital Inputs at 24/48 or 24/96:0.001% |
| ZONE 2 and ZONE 3 PATHS |
| Frequency Response and Bandwidth |
20 Hz to 20 kHz (+0 -0.1 dB), 3 Hz to 140 kHz (+0 -3 dB) |
| THD+N (at Rated Input and Output) |
0.06% (80 kHz BW) |
| IMD (CCIF at 15 kHz and 16 kHz) |
0.06% |
| S/N Ratio (ref. 2.0 Vrms, IEC-A Filter) |
97 dB |
| FM TUNER |
| FM TUNER |
Analog Sensitivity:13 dBμ typical, 25 dBμ max. |
| IHF:10 dBμ typical, 20 dBμ max. |
| S/N Ratio |
Mono:75 dB typical, 65 dB min. |
| Stereo:69 dB typical, 60 dB min. |
| Distortion |
Mono:0.2% typical, 1.0% max. |
| Stereo: 0.3% typical, 1.5% max. |
| Stereo Separation |
40 dB typical, 25 dB min. |
| Alternate Channel Selectivity (+/- 400 kHz) |
70 dB typical, 60 dB min. |
| Sensitivity (20 dB S/N) |
49 dBμ typical, 56 dBμ max. |
| Frequency Response |
25 Hz to 15 kHz (+0 -2 dB) |
| S/N Ratio |
50 dB typical, 43 dB min. |
| Distortion |
0.7% typical, 2.0% max. |
| One-Signal Selectivity (+/- 10 kHz) |
24 dB typical, 18 dB min. |
控制
CONTROL |
| Infra Red |
Carrier Frequency:38 kHz |
| Maximum 12 V Supply Current:150 mA |
| Maximum Emitter Current:60 mA per output |
| RS-232 Interface |
Maximum Emitter Current Connection:60 mA per output |
| Pinout (D2v side):Pin 2: Tx, Pin 3: Rx, Pin 5: Ground |
Baud Rate:
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 8 data bits, 1 stop bit, no parity bits, flow |
| Configuration:control (RTS/CTS, none) |
| Trigger Outputs |
Polarity:tip positive, sleeve ground |
| Maximum Current at 12 VDC:300 mA between all three triggers |
| Sequential Delay: 250 ms |