• Jeff Rowland Capri S2-SC 前級擴大機 規格表

Capri S2-SC 具有令人印象深刻的標準輸入/輸出介面；透過其唱機卡選項大大增強了靈活性； Rowland 商標的棱柱形鉑金面板完美地整合到由實心鋁塊銑削而成的非共振底盤中。

Capri S2-SC 的輸出阻抗僅為 80 歐姆平衡阻抗和 40 歐姆單端阻抗， 可以充滿信心地驅動任何擴大機。無論是為黑膠唱片設備中的單端三極管放大器提供服務，還是控制四組固態 Rowland 放大器或家庭影院設置的連接處，Capri S2-SC 前置放大器都能提供 Rowland 標誌性的音樂性、分辨率和一致的權威性。

Features
Compact elegance
Balanced preamplifier design housed inside a low profile, compact, ultra-low resonance, structurally rigid chassis that is precision-machined from solid blocks of aircraft grade 6061-T6 aluminum that is completely sealed for trouble-free operation and high RF and EMI isolation. Features an elegant front panel precision-machined and sculpted with a diamond tipped cutting tool.

Universal power supply
Low noise, high-current, dual regulated switch- mode auto sensing and auto ranging power supply provides Capri with optimum performance at any world-wide mains operating voltage.

Thin-Film Resistors
All resistors are low noise, 0.1% thin-film type for extremely low thermal noise which complement the low-noise characteristics of the active circuitry.

Four-Layer Circuit Board
All circuitry is populated on one side of a 4 layer circuit board to allow for continuous, unbroken, low impedance ground and power supply distribution planes. Care was taken to minimize signal path lengths and components sizes.

Input transformer-Coupling and Isolation
Transformer coupled input circuitry provides universal component compatibility and virtually eliminate ground loop noise and RFI/EMI. Transformer coupling ensures identical preamplifier overall gain when using unbalanced input adapters. Other benefits include ground noise isolation and excellent common mode noise rejection (CMRR) from all sources.

I/O flexibility
Dual low impedance line-level outputs (80 Ohms balanced, 40 Ohms unbalanced), 48 Ohms balanced and unbalanced inputs, and preamp bypass inputs allow unprecedented compatibility with audio and A/V components, while optional high quality phono cards are available for compatibility with vinyl sources.

Remote control
Six-function remote control transmitter display dim, adjusts volume, input selection, mute, phase, and channel balance.

Precision volume adjustments
Dual rate volume control allows precision level adjustments over nearly a 100 dB range. The volume control incorporates a permanently noiseless optical encoder that always maintain its tactile feel, accuracy, and channel balance at all settings. The optical encoder mounted behind the volume knob commands the attenuation level of a monolithic resistor attenuator over a 99.5 dB range in 0.5 dB increments.

Optional Phono Cards
Plug-in Standard phono cards (installed internally) converts Line Input 1 to high performance phono input. Three gain and loading options can accommodate moving magnet (MM), moving coil (MC), and high output moving coil cartridge types. OR the HP (High Performance) cards can be installed for a high performance MC with input transformer with many load options.

Home Theater Bypass Adjustment
The Home Theatre BYPASS RCA inputs can be changed to an additional set of standard inputs by placement of an internal jumper inside the unit.

Display Off (5 Sec)
An internal jumper will place the display in an automatic OFF condition after 5 seconds from any operational command and illuminates again for 5 seconds after additional commands are initiated.

High-quality connectors
All signal connectors are rhodium plated, copper jacks (RCA) and Neutrix silver plated contact (XLR), soldered directly to the circuit board for direct connection to the signal circuitry.

Green technology
Modest power consumption of mere 6 Watts permits constant power-up operation to eliminate warm-up time and maximize musical performance, and allows Capri to operate enclosed into an entertainment unit.

IEC
15 Amp female IEC AC power connector.

  回上一頁      回主選單