• Jeff Rowland CONTINUUM S2 後級擴大機 規格表

全新 Rowland Continuum 系列 2 整合式擴大機具有增強的聲音性能和靈活性，透過先進的拓撲結構提供令人驚嘆的動態真實感和表現力。 Continuum S2 將新的 Capri S2 前置放大電路、輸入/輸出和控制功能與創新的 400 瓦功率放大級整合到單一機殼中。

這款擴大機為最精緻的音訊環境提供了 Rowland 標誌性的音樂性、解析度和可靠的權威性：挑戰 Continuum S2 的高解析度數位來源的極端動態和大型雙線揚聲器的功率要求。將其應用於模擬設備中靜電面板的複雜負載。欣賞其在複雜的多媒體系統中驅動單線工作室監視器的非凡真實感。

Continuum S2 符合人體工學的控制台的優雅源自於堅固的航空級鋁塊。探索令人印象深刻的標準輸入/輸出介面補充。透過可選的 DAC 卡或其完全重新設計的唱機等級來增強其靈活性。

Features

Understated elegance
Integrated 400W balanced amplifier design housed inside an elegant, ultra-low resonance, structurally rigid chassis that is precision-machined from solid blocks of aircraft grade 6061-T6 aluminum that is completely sealed for trouble-free operation and high RF and EMI isolation.

Power supply efficiency
Regulated, high speed, vanishingly quiet switch mode power supplies (SMPS) ensure consistent performance under all operating conditions.

Leading preamplification
Advanced linestage circuit based on the sophisticated topology of the Capri 2 preamplifier yielding and incredibly refined musical experience from a compact and efficient system.

Thin Film Resistors
All resistors are low noise, 0.1% thin-film type for extremely low thermal noise which complement the low-noise characteristics of the active circuitry.

Four Layer Circuit Board
All circuitry is populated on one side of a 4 layer circuit board to allow for continuous, unbroken, low impedance ground and power supply distribution planes. Care was taken to minimize signal path lengths and components sizes.

Green power
Twin ultra- high efficiency power conversion modules yield 400 Watts per channel into 8 Ohms, doubling over 4 Ohms, and a peak current of 40 Amps.

Enhanced authority
Continuum S2 balanced output stages are equipped with unique bank of large bulk output capacitors that further enhance its transient speed, sonic authority, macro dynamics, and presence.

I/O flexibility
Dual line-level outputs (balanced and unbalanced), balanced and unbalanced inputs, and preamp bypass inputs allow unprecedented compatibility with audio and A/V components, while optional high quality phono cards are available for compatibility with vinyl sources.

Fully balanced
Balanced input and output topology, including active positive and negative leads on Cardas output terminals for optimum speaker control, yields high common rejection ratio of 85dB over 20 to 20 KHz audio frequency band.

Line level transformer-coupled IO
Transformer coupled input circuitry provides universal component compatibility and virtually eliminate ground loop noise and RFI/EMI. Transformer coupling ensures identical overall gain with all inputs. Other benefits include ground noise isolation and excellent common mode noise rejection (CMRR) from all sources.

Precision volume adjustments
Dual rate volume control allows precision level adjustments over nearly a 100 dB range. The volume control incorporates a permanently noiseless optical encoder that always maintain its tactile feel, accuracy, and channel balance at all settings. The volume can be adjusted from 0dB to 99.5dB from the volume knob on the front panel, as well as from the 9 function remote control. Rapid turns of the volume control adjust the volume by 1.5dB increments. Slow turns of the control allow for very fine adjustments by 0.5dB increments.

Quiet power
Rocker switch on back panel coupled to timer relay, turns Continuum quietly on to full power after circuit stabilization.

Remote control
Six-function remote control transmitter with individual input select buttons controls volume, input selection, mute, and channel balance.

Remote trigger
Supports 12V remote ON/OFF remote trigger for power switching via 1/8” jack on rear panel.

Grounding
Grounding post for star-grounding and other advanced configurations is accessible on the rear panel.

IEC
15 Amp female IEC AC power connector.

  回上一頁      回主選單