Audio Refinement
 後級輸出 功率放大 聲道數量 ＆ 每聲道阻抗 Ω 換算 瓦特(w)值 規格 | |
| 擴大機 音場聲道組數 ● 範例： 5.1／7.1／9.2／11.2 5.1.2／5.1.4／7.1.2／7.2.4 ● 註解： 小數點後1位數為超低音組數！ 小數點後2位數為天空聲道組數！ | |
| 每一聲道 額定功率瓦特數 Ｗ： （ 阻抗：歐姆 = Ohm = Ω ） 依照各廠商提供之規格內容記載 | 40K Ω (ohms) |
| 前方面板 影音輸出／入端子 | |
| ✔ HDMI 支援輸入 | |
| ✔ USB 支援 | |
| ✔ "耳機"輸出連接孔 ( Phones ) | |
| ✔ 自動音場校調系統 Mic 連接孔 ( MCACC ) | |
| ✔ AV RCA 複合式 影音輸入端子 （ 黃,白,紅 or 全黑） | |
| 後方背板 影音輸入端子 | |
| HDMI 影音輸入端子 組數 | |
| 色差影像 輸入端子 組數 紅,藍,綠 3色（Component） | |
| AV 複合式 影像輸入端子 組數 黃色端子（Composite Video） | |
| 類比聲音端子／紅,白 端子 組數 （Analogue Audio） | |
| ✔ 類比複合式 多聲道聲音輸入 紅,白 端子 （Multi Ch In／Pro In） | |
| ✔ 黑膠唱盤 聲音輸入端子 ( Phono ( MM / MC ) ) | |
| 數位光纖 輸入端子 組數 ( Digital Optical In ) | |
| 數位同軸 輸入端子 組數 黑or橙色端子( Digital Coaxial ) | |
| ✔ 數位 USB 解碼 輸入連接孔 六角形接頭（USB DAC IN） | |
| 後方背板 影音輸出端子 | |
| HDMI 影音監控輸出 組數 ( HDMI Monitor Out ) | |
| 色差影像 輸出端子／紅,藍,綠 3色端子 組數（Component） | |
| ✔ AV 複合端子 影像輸出 黃色端子 ( Monitor Out ) | |
| ✔ 類比複合式 多聲道聲音輸出 紅,白 端子 （Multi Ch Out／Pro Out） | |
| ✔ 超低音 輸出端子 (SBU／SUBWOOFER／SW) | |
| ✔ 分區輸出：前級 Zone 2 （Pre Out） | |
| ✔ 分區輸出：前級 Zone 3 （Pre Out） | |
| ✔ 分區輸出：後級 Zone 2 （Power Out） | |
| ✔ 分區輸出：後級 Zone 3 （Power Out） | |
| 其他周邊資訊 | |
| ✔ 調幅 AM 收音機天線 ( AM Tuner Antenna ) | |
| ✔ 調頻 FM 收音機天線 ( FM Tuner Antenna ) | |
| ✔ USB Port 背板連接端子 | |
| ✔ RS-232C 連接埠 | |
| ✔ 遙控連結控制 輸入 (IR Remote Control In ) | |
| ✔ 遙控連結控制 輸出 ( Remote Control Out ) | |
| ✔ 觸發啟動控制 12伏特 輸出 （Trigger Out 12V） | |
| ✔ 遙控器：█ 標準型 ● 學習型 | |
| 有線 ／ 無線網路 ＆ 影音相關 軟體支援 | |
| ✔ 杜比全景聲 "天空聲道 " ( Dolby Atmos ) | |
| ✔ Wi-Fi 無線網路 連結功能 ( Wireless Direct ) | |
| ✔ 乙太 有線網路 連結功能 ( Ethernet ／ LAN ／ RJ45 ） | |
| ✔ "藍芽" 無線功能 Bluetooth 相容支援 無線音樂串流功能 | |
| ✔ AirPlay *音樂串流 相容 AV Controller app 軟體 | |
| ✔ Spotify® *音樂串流 相容 AV Controller app 軟體 | |
| ✔ Play - Fi *音樂串流 相容 AV Controller app 軟體 | |
| 其他規格 | |
| ✔ 適用台灣電壓 ( Applied Voltage／Taiwan ) | |
| 消 耗 功 率 | 250W / 8ohms , 850W / 4ohms |
| 外觀尺寸 ( 寬 × 高 × 深 mm） ( Dimensions ( W×H×D mm)) | 39.4 x 8.6 x 27.9 cm |
| 重量： 公斤 kg | 9.79 kg (台) |
• Jeff Rowland model 535 後級擴大機 規格表
|
一種可橋接的功率放大器，可提供驚人的動態逼真度和表現力的精緻效果。535型裝在由堅固的飛機級鋁塊製成的機架中，其創新的拓撲結構體現了功率和效率。
從以立體聲模式為核心的單個535型音響系統（位於私密音頻系統的核心），到為複雜的家庭影院設置供電的多個橋接單元，再到驅動複雜的兩聲道環境的橋接對，535型都可提供出色的分辨率，權威性。 ，並控制幾乎任何大小和負載的揚聲器。
A bridgeable power amplifier that delivers stunning dynamic realism and expressive refinement. Housed in a chassis milled from a solid block of aircraft-grade aluminum, the Model 535 features an innovative topology that epitomizes power and efficiency.
From a single Model 535 in stereo mode at the core of an intimate audio system, up to multiple bridged units powering a complex home theater setup, down to a bridged pair driving a sophisticated two-channel environment, the Model 535 delivers exquisite resolution, authority, and control to speakers of almost any size and any load.
-
Machined Aluminum Chassis
Precision-machined chassis, milled from a solid block of aircraft grade aluminum, provides exceptional thermal heat transfer/dissipation, RFI/ EMI shielding, resonance control, and minimizes micro-phonically induced microvibrations from any source.
Ceramic Circuit Boards
Critical audio circuits are implemented on mil-spec, multilayer, low dielectric constant, Rogers™ ultra-rigid ceramic circuit board substrate for extremely low energy retention and absorption. Large low impedance ground planes areas for extended internal star-grounding.
Balanced Topology
Inherent cancellation effects of balanced topology implemented throughout power and input/output circuits ensure reduced distortion and noise under dynamic signal conditions.
High-Precision Surface Mount Components
Extensive use of Lead (Pb)-free, low temperature coefficient, active and passive surface-mount components results in significantly smaller loop areas, reduced circuit capacitance and inductance, and introduces less noise than conventional leaded components.
Thin-Film Resistors
All resistors are low noise, 0.1% thin-film type for extremely low thermal noise which complement the low-noise characteristics of the active circuitry.
Teflon Insulated Wires
All signal carrying input and output wires are teflon insulated, for low dielectric energy storage, ensuring that each audio note naturally decays into the deeper silence of the music.
Transformer-Coupling and Isolation
Transformer coupled input circuitry provides universal component compatibility and virtually eliminates ground loop noise and RFI/ EMI. Transformer coupling ensures identical amplifier overall gain when using unbalanced input adapters.
Active Power Factor Correction
Power Factor Correction (PFC) integrated into the power supply reduces AC line harmonic noise pollution and increases AC line power utilization to 97%.
High-Efficiency Switch-Mode Power Supply
Highly efficient, compact, light weight, switch-mode power supply provides optimum voltage regulation for all circuits and operating conditions, and allows for quiet operation over a wide range of AC mains power sources.
Binding Posts
CE approved speaker output terminals require no tools for secure, low resistance connections.
Front Panel Standby Button
Illuminated front panel push-button switches the amplifier into standby mode (<0.3 watt consumption). An internal switch allows the user to dim the front panel indicator light “ring” or shut off the light altogether when the amplifier is powered on. REMOTE ON/OFF: A 1/8” (3.5mm) mini plug connector on rear panel permits amplifier power on/standby switching in remote and home theater applications. ><0.3 watt consumption). An internal switch allows the user to dim the front panel indicator light “ring” or shut off the light altogether when the amplifier is powered on.
Remote On/Off
An 1/8” (3.5mm) mini plug connector on rear panel permits amplifier power on/standby switching in remote and home theater applications.
回上一頁
回主選單
