Contour ＆ Focus...等 系列
 喇叭音箱及單體型式 | |
| 喇叭型式種類 or 幾音路數值 ( Format / Audio path ) | Bookshelf |
| 超高音單 尺寸規格 ( Super Tweeter Driver ) | |
| 高音單體 尺寸規格 ( Tweeter Driver ) | 28 mm Esotar 3 |
| 中高音單體 尺寸規格 ( Mid / Tweeter Driver ) | |
| 中音單體 尺寸規格 ( Mid Driver ) | |
| 中低音單體 尺寸規格 ( Mid / Bass Driver ) | |
| 低音單體 尺寸規格 （Bass=Woofer Driver） | 18 cm MSP |
| 功率及頻率範圍 | |
| 一般阻抗 Ω 數值 ( Impedance ) | 4Ω |
| 效率 / 靈敏度 dB數值 ( Sensitivity ) | 85 |
| 持續 承受功率 "w" 數值 ( Sustained Power "watts = w" ) | |
| 最大峰值 承受功率 "w" 數值 ( Maximum Power "watts = w" ) | |
| 建議擴大機 功率瓦數範圍 ?~? w(瓦) RecommendedAmplifierPower | |
| 分頻點/分音器頻率？Hz/？kHz 數值 ( Crossover Frequencies ) | 2200 Hz |
| 頻率響應 ？Hz ~ ？kHz 數值範圍 ( Frequency Response ) | |
| 低頻延伸度 ？Hz 數值 ( Bass Extension ) | |
| 參數調整 ( Parameter Adjustment ) | |
| 同軸式喇叭 特有規格 | |
| 同軸式™ 高音單體 | |
| 同軸式™ 低音單體 （或 中低音單體） | |
| 主動式喇叭 特有規格 | |
| 高音擴大機功率 " 瓦特 " (Tweeter Power Amplifier "watts") | |
| 低音擴大機功率 " 瓦特 " (Woofer Power Amplifier "watts") | |
| 適用電壓 ( Applied voltage ) | |
| 外觀型式 | |
| 外觀顏色 ( 表面材質處理 ) | Black |
| 外觀尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm)) | 385 x 208 x 320 |
| 淨重： 公斤 kg 數值 （ Net Weight / kg ） | 11kg |
• DYNAUDIO Heritage Special 限量傳奇特別版書架型喇叭、揚聲器 規格表
|
|
1977年成立的丹麥音響大廠擁有許多愛好者，包括我自己曾經也擁有一對Dynaudio 25周年紀念版(2002年)，其出色的表現、經典的設計至今仍是讓我難以忘懷的一對喇叭。在2020年底，Dynaudio似乎聽到了許多DY迷最內心的渴望，推出了有濃濃復古味道的Heritage Special書架喇叭，全球限量2,500對，並保證不再生產，馬上引起全球發燒友熱烈討論，0001號已被Dynaudio自家收藏。
Heritage Special從頭到尾在Dynaudio Skanderborg自家工廠設計生產，其表現有多厲害? Dynaudio產品管理部總裁Otto Jørgensen在聽第一對成品時，原本只預計聽15分鐘，最後卻聽了2個多小時卻還意猶未盡。Heritage Special耗時超過了2,000多小時的R&D，箱體採用厚達19mm MDF，外層採用純手工造的美國胡桃木，木紋特地經過挑選，每一面都是對稱，每一對都是獨一無二，並刻意在前面板四周加上了經典Dynaudio的溝槽。箱體在黏合組裝後需等待24個小時的自然烘乾之後，再進行後續手工打磨加工處理。
Esotar T330D是Dynaudio傳奇的高音單體，Heritage Special所使用的Esotar 3是在其基礎上更加優化，包括改用Dynaudio最先進的高音技術，更強的釹磁鐵、單體後的音管更大以及消除共振的Hexis內圓頂設計，這只有在Dynaudio高階Confidence系列上採用。Heritage Special所使用的18W75 XL Heritage Special MSP低音單體承襲了旗艦Evidence Platinum系列的設計，但在音圈與磁鐵系統都進一步改良，包括使用玻璃纖維取代鋁、釹與永磁的混合式磁鐵系統、Nomex尼龍纖維蜂巢等。
Dynaudio Heritage Special 主要研發 生產團隊
● 團隊核心: Daniel Emonts(Director of Product Management), Otto Jørgensen
● 箱體製作: Martin(17年經驗), Arkadijs, Mikkel(上漆), Malene(打磨)
● 單體製作: Stine
● 分音器製作: Daniel設計，Holms Radiofabrik生產
● Dynaudio Skanderborg自家工廠純手工打造
● 3 x 13 x 13m Jupiter 木星聲學實驗室測量
Dynaudio Heritage Special 書架喇叭 技術規格
● 全球限量2,500對，售完即止，0001號原廠收藏。
● 2音路低音反射式設計。
● 效率: 85dB (2.83V/1m)
● 承受功率: 200W
● 阻抗: 4 Ω
● 頻率響應(± 3dB): 42Hz–23kHz
● 分頻點: 2200 Hz
● 分音設計: 1階分音
● 低音單體: 18cm MSP cone
● 高音單體: 28mm Esotar 3
● 重量: 11Kg
● 尺寸: 208 x 385 x 320 mm
Heritage Special
‘Heritage Special’ isn’t just a name. It’s a salute to traditional high-performance Danish audio design. And each of the 2500 limited-edition pairs is unique.
小 Listen to craftsmanship. Listen to real wood. Listen to state-of-the-art, hand-built tweeters and woofers. To more than 2000 hours of devoted R&D. To the depths of your record collection. Listen to what you love.
Heritage Special is brimming with the spirit (and flødebolle-fulled boldness) that made the Dynaudio name – plus some extra surprises. Run your fingers over the hand-finished American Walnut finish. Discover the meticulously crafted joins and corners of the individually selected – and individually matched – veneer panels. Pause at the signature groove surrounding the baffle (you’ll remember it from the Dynaudio speakers you coveted years ago).
And then put the top-of-the-line Esotar 3 tweeter and souped-up Evidence woofer through their paces with something that’ll rock your socks off.
We made Heritage Special for you.
Made in Denmark
It’s a tribute to some of our most legendary bookshelf speakers. Get up-close and personal, and you’ll notice little design cues from classics including Crafft (1989) and Special Twenty-Five (2002). There’s a tip of the hat to the first Contour (1986). Even the backplate offers a knowing wink to Sapphire (2008).
Creating it was a labour of love… not to mention secrecy. Daniel Emonts and Otto Jørgensen, the masterminds behind the project, could often be seen in the Dynaudio Labs kitchen whispering, sotto voce, about things like “American Walnut”, “Mundorf” and “Martin over in the Danmarksvej factory”. (They stopped as soon as anyone from the marketing department came in.)
Heritage Special is limited-edition: 2500 pairs… and once they’re gone, they’re gone. When our production department found out what we were building, they were so excited that they demanded to make it from top to bottom, inside and out, at home in Denmark.
That’s why ‘Special’ isn’t a word we use lightly. Everything in these speakers, from the cabinets (made and finished in Skanderborg by Martin, Arkadijs, Mikkel and Malene), to the drivers (headed-up by Stine, also in Skanderborg) and the crossovers (designed by Daniel, also in Skanderborg and made by Holms Radiofabrik just down the road in Horsens) is crafted with that word in mind.
It’s hip to be square
This is where Heritage Special takes shape. Literally. It isn’t a photo-set, carefully dressed to look like a factory. It’s a factory, left as it is, with a finished Heritage Special left on the bench after Martin went home (he didn’t want us distracting him with cameras while he worked).
Martin has been with Dynaudio for 17 years. The cabinets he and his colleague Arkadijs produce are made right here. Each panel is matched – the fronts, sides, tops and bottoms to each other, and then between the speakers in the pair – and then numbered before assembly so they can be kept together.
Next, the list strips. These thin veneers along the cabinet edges are selected for the right colour tone and grain characteristics, then matched to each other (and between each speaker pair) and numbered to sit with the panels.
We use 19mm MDF for the cabinets (it’s a rigid, stable material that’s perfect for the kind of precision cutting and joining you’ll see here), and sustainable American Walnut for the external veneers. Internal bracing is installed to ensure the cabinet is as rigid as possible, and there’s also a layer of heavy bitumen on the inside surfaces that helps minimise unwanted resonances even more.
Once they’re glued and clamped, they’re left to dry. Then, 24 hours later, they’re given to Malene for sanding to perfect smoothness and flatness. By hand.
She makes it look easy. It really, really isn’t.
Malene makes sure the surfaces are ready for Mikkel to lacquer. He applies two coats (returning them to Malene for another sanding after each one), before giving them the final finish. It’s a process we’ve perfected over the course of more than 40 years – and when you run your fingers over that surface, you’ll feel just how good we’ve got at it.
After being checked, lusted over by passing employees and given a goodbye salute, the cabinets are taken to have their drivers, crossovers and finishing touches applied.
Old’s cool
If you were to ask any Dynaudio speaker how it would want to be built, it would say “like this”. And then point to itself.
For Heritage Special, it was only natural to reach straight for the top shelf when it came to specifying its drivers.
Look closely at the tweeter. Dynaudio historians will notice the unmistakable shape of the legendary Esotar T330D soft-dome tweeter. That’s Special enough on its own – but if a job’s worth doing, it’s worth doing jaw-droppingly. So we’ve replaced the insides with the finest tweeter technology we’ve ever created: Esotar 3. You’ll also find it, along with its powerful neodymium magnet, larger rear chamber and resonance-defeating Hexis inner dome, in our top-of-the-line Confidence series.
Taking on mid/bass duties is something equally Special: the 18W75 XL Heritage Special MSP Woofer (sometimes it’s worth giving a component its full honorific). If you were truly eagle-eyed, you might remember its exponential cone design from the magnificent Evidence Platinum series. The difference is, we’ve taken it further: this driver has an improved voice coil (a classic internal-magnet design with aluminium windings, now on a glass-fibre former); magnet system (a hybrid design with both neodymium and ferrite magnets for even greater flux control); and spider (aramid fibre, as seen on Confidence and Contour i).
The crossover is really quite something. Senior acoustic designer Daniel Emonts went back to basics and came up with a bespoke first-order topology, then demanded it be endowed with the finest components our friends at Mundorf in Germany could supply. Key parts are custom-built to our exacting standards, and Mundorf’s legendary Evo Oil capacitors are used in the critical signal path. There’s also local impedance-correction on board for each individual tweeter and woofer, as well as time-alignment technology, to make for a silky-smooth transition between drivers.
If you were to take the speaker apart, you’d also discover 12 AWG internal wiring by Van den Hul, and Swedish-made polyester damping material. (But you’ll just have to take our word for that; please don’t disassemble your new Heritage Special speakers.)
On the brushed aluminium back-plate you’ll see top-of-the-range WBT 710 Cu mC NextGen terminals – yet another premium detail for you to marvel at. And when you plug in your cables… well, we’d be surprised if you didn’t do it two or three times more just because it feels and sounds so nice.
Finally – of course – there’s also your individual pair number. (We’re being selfish and keeping number 0001 for ourselves.)
Listen with heart
Sometimes you buy A Thing with your head. You have very logical reasons, and the results are entirely predictable based on the circumstances that Thing finds itself in.
Sometimes, though, you buy with your heart. Logic be damned.
And the results are… well… Special.
Features
Classic Dynaudio technology
Magnesium Silicate Polymer mid/bass units, aluminium internal-magnet voice-coils, soft-dome Esotar 3 tweeters, first-order crossovers and more… brought right up to date.
Refined in Jupiter
‘Heritage’ needn’t mean ‘outdated’. We’ve used our state-of-the-art, 13 x 13 x 13m Jupiter measuring array to help tune Heritage Special. (Make no mistake, if we had it back in the 80s, we’d’ve used it then, too.)
Limited to 2500 pairs
Once they’re gone, they’re gone. And if you’re lucky enough to own a pair, you’ll be owning an exclusive piece of Dynaudio history.
Our first listening session with the first playing pair of Heritage Specials was meant to last 20 minutes. It ended more than two hours later. I think that says everything you need to know about these speakers. We absolutely love them
Otto Jørgensen, Director of Product Management
回上一頁
回主選單
