喇叭音箱及單體型式
喇叭型式種類 or 幾音路數值 ( Format / Audio path )	Floorstand
超高音單　尺寸規格　　 ( Super Tweeter Driver )
高音單體　尺寸規格 ( Tweeter Driver )	28 mm Esotar 3
中高音單體　尺寸規格 ( Mid / Tweeter Driver )
中音單體　尺寸規格 ( Mid Driver )
中低音單體　尺寸規格 ( Mid / Bass Driver )
低音單體　尺寸規格 （Bass=Woofer Driver）	2x 18 cm MSP cone
功率及頻率範圍
一般阻抗　Ω 數值 ( Impedance )	4Ω
效率 / 靈敏度　dB數值 ( Sensitivity )	90
持續 承受功率 "w" 數值 ( Sustained Power "watts = w" )
最大峰值 承受功率 "w" 數值 ( Maximum Power "watts = w" )
建議擴大機 功率瓦數範圍 ?~? w(瓦) RecommendedAmplifierPower
分頻點/分音器頻率？Hz/？kHz 數值 ( Crossover Frequencies )	3400 Hz
頻率響應　？Hz ~ ？kHz 數值範圍 ( Frequency Response )
低頻延伸度　？Hz 數值 ( Bass Extension )
參數調整 ( Parameter Adjustment )
同軸式喇叭 特有規格
同軸式™　高音單體
同軸式™　低音單體 （或 中低音單體）
主動式喇叭 特有規格
高音擴大機功率　" 瓦特 " (Tweeter Power Amplifier "watts")
低音擴大機功率　" 瓦特 " (Woofer Power Amplifier "watts")
適用電壓 ( Applied voltage )
外觀型式
外觀顏色 ( 表面材質處理 )	Black
外觀尺寸 ( 高 × 寬 × 深 mm） ( Dimensions ( H × W × D mm))	995 x 208 x 345
淨重： 公斤　kg 數值 （ Net Weight / kg ）	32.5kg

•　DYNAUDIO CONTOUR LEGACY 落地型喇叭、揚聲器 規格表

首先登場的是 Heritage Collection 的新成員。Contour Legacy是一款精美的落地式 2.5 路揚聲器，與 2020 年最暢銷的 Heritage Special 的外觀相呼應。它向 20 世紀 80 年代和 90 年代的原始 Contour 揚聲器致敬，同時採用我們最新的驅動器專業知識和聲學技術來更新一切。

它使用我們的頂級 28mm Esotar 3 軟球頂高音揚聲器（包括 Hexis 抗共振內球頂）；雙 18 公分低音揚聲器源自經典的 Evidence 系列（經過調整和增強，達到了更令人驚嘆的水平）；加上精美優雅的分頻器，配備精選優質組件。

Contour Legacy 是在我們位於丹麥斯坎訥堡的總部手工製作的。它採用可持續的美國胡桃木製成，每塊飾面都經過精心挑選，並與每個揚聲器相匹配（當您看到它們時，您會意識到那段時間是多麼值得）。全球限量生產 1000 雙；每個都有自己的配對號碼供後代使用。

Sit on the floor. Lean back against the chair with the liner-notes in your hands. Close your eyes and listen like you used to.

Contour Legacy is part of the Dynaudio Heritage Collection. It’s all about music, well listened-to. Sturdy quality. Nostalgia. It’s a loud strum of your heartstrings – and each of the 1000 limited-edition pairs has been proudly handmade in Denmark by Martin, Anne, Daniel, Claus and Kamil… just for you.

It remasters Dynaudio’s greatest hits – including modded Evidence Platinum woofers, the legendary Esotar 3 tweeter and a crossover that can only be described as an artisanal masterpiece. (Can you tell we’re proud?)

Run your hand over the sustainable American Walnut finish; marvel at the mitres, precision-cut to tiny fractions of one degree; stand back and take in the fact these friendly-looking speakers are packed with the most up-to-date audio technology available. (Then realise that the most old-fashioned thing about them will probably be the music you play!)

It's OK, though. We’re with you there: old’s cool.

Remastering a classic

Contour Legacy is an intentional homage to the late, great Contour 1.8 – and, like its muse, it has that… ‘Something’. That reassuring sense of pride and craftsmanship that is, perhaps, less common in the world these days.

So, you might already be expecting a listening experience that’s a trip down memory lane. Or Penny Lane.

But no. It’s better than that. This is a memories upgrade.

Beneath that chocolate brown American Walnut veneer lives a totally different generation of technology. The original drivers and electronics from the elder Contour have been replaced by components that look superficially familiar, but sound substantially better.

As a Contour Legacy owner, you have permission to feel nostalgic but modern – whether you’re streaming or lowering a stylus. Go ahead. Invite someone from the white plastic earbuds generation to take a listen. Watch them go into in a flow state, track after track, losing track of time and what they’d promised to do with it.

Or make a point of inviting nobody, sit down in your sweet-spot and remind yourself what pure indulgence sounds like.

A marriage made in Skanderborg

Every left and right Contour Legacy loudspeaker is, like a swan, paired for life. It has a partner, from the moment its components are carefully placed on our workbench in Jutland.

Each panel of each cabinet is made from a composite board made from the same source, chosen as if it were a vineyard for a domaine. It’s faced by a layer of sustainable, tactile, warm American Walnut. Martin – a man with twenty years’ experience of making Dynaudio speakers – selects these panels, two by two, so that their grain looks similar. It can only be done by eye.

It’s a labour of love, and a process that would be unfathomable to have replicated by some anonymous robot in some anonymous factory.

That robot wouldn’t clamp each joint bonded by our Glue Master, (yes, that’s his real title). It wouldn’t be concerned about the precision of the joints, cut to fractions of one degree. Or the effect the weather will have on the integrity of the jointed angles (our humans make sure all their glueing is finished by the end of the day to stop any unwanted changes).

It wouldn’t reject a pair of speakers because one of them had a blemish almost invisible to the naked eye.

A robot wouldn’t sense the feeling you get as you run your fingers over a tiny groove in the front facing panel. It wouldn’t take pleasure in the smell of hardwood, as the doors to the workshop are opened, early morning, at the same time as laptops.

Making a pair of Contour Legacy loudspeakers is time consuming – and even slightly obsessive, with a magical result that certain people appreciate.

Like all Dynaudio speakers, that obsession extends to the bits you can’t see, or rarely look at. Like the dual-flared bass-ports, which gently control airflow and bass response, or the heavy, stable cast-iron base. No sticky-out feet here.

Our sound engineers had two demanding critics to impress. Their ears.

Dynaudio sound engineers don’t see playing homage to a classic as a good reason to get out of bed. They need a challenge. And, in the Contour Legacy, they got it.

Since the original Contour, speaker cabinets in general have gradually become fancier. Specifically engineered to a degree you might imagine happening in a Formula One team. Maybe not wind-tunnel-tested (although that has given us a few ideas), but definitely subject to exhaustive analysis.

Curves and bends have found their way into the shapes of modern Dynaudio speakers, shaping and controlling pressure-waves, reflections, refractions… smoothly guiding sound to its smiling, satisfied destination.

But part of what makes the Contour Legacy so comforting and familiar is its old-school, rectangular format. So, how did our R&D team get around this obstacle and still deliver such outstanding results?

They modified the woofers from the Evidence Platinum, placing them in parallel, with the lower one increasing the sensitivity of its upper neighbour – so the upper driver handles midrange and bass, while the lower one just handles bass. Which meant they needed to design a higher impedance voice coil. Which meant no crossover was available off the shelf to orchestrate this idiosyncratic selection – so the team designed one from scratch, including capacitors and connecting wiring from Europe’s finest manufacturers, including Duelund, Mundorf and Van den Hul. (Our engineers do rather love that kind of snowball effect.)

Then they crowned it with our legendary Esostar 3 tweeter. A tweeter that needs no introduction here.

From concept to engineering model to verification and prototypes – with all the tweaking and modification in between – Dynaudio sound tuners spend approximately two weeks listening per iteration.

In fact, around 70 per cent of the modifications to a loudspeaker such as Contour Legacy are done as the result of listening, rather than looking at data.

Although when they do get that data, they do it in style. Our Jupiter measurement facility is one of the largest in the world – and plays a crucial role in steering our speakers’ development. It accomplishes in 20 minutes what could easily take days using more conventional (and less accurate) methods. Which means we can spend more time listening…

Behind closed doors – with a source, a DAC and an amp used for all our sound tests – our team plays music from heavy metal to Mozart, Kylie to Columbian flute.

At the end of the day, regardless of a loudspeaker’s raison d'être, it’s in the sweet spot where the real verdict is made

And that’s where the Contour Legacy will leave a lasting one.

Features

Handmade for you
Contour Legacy is made and finished by hand in Skanderborg. ‘Passion’ can be an overused word – but take one look at our craftspeople and you’ll see it straight away.

Quality, inside and out
We’ve made sure the bits you can’t see are just as pristine as the parts you can. Duelund, Mundorf and Van den Hul components are paired with our very best drivers.

Classic Dynaudio design
It wouldn’t be worthy of its name if it didn’t look like it does. Contour Legacy has taken inspiration from the legendary Contour 1.8, as well as quite a few other classics from our past.

  回上一頁      回主選單