•8000X7產品規格表
|
Power Output |
7 x 100W into rated load impedance (8 Ohm)
5 x 100W and 1 x 150W (8 Ohm)
3 x 100W and 2 x 150W (8 Ohm) |
|
IHF tone burst power |
7 x 120W (8 Ohm) |
|
Input for rated power |
1.05 Vrms |
|
Input impedance |
47 kohm |
|
Gain |
+28.8 dB at 1 kHz |
|
Signal to noise |
better than 90 dB (relative to 0 dBW) unweighted |
|
|
|
Frequency response |
1.5 Hz - 150 kHz ( -3 dB ) |
|
Crosstalk Rejection |
> 90 dB @ 1 kHz |
|
S/N ratio (EFFECT OFF): |
left/right: > 102 dB (A-weighted)
all other channels: 90 dB @ 0 dB volume setting |
|
Power Source |
U.K. AC 230v/50Hz |
|
Dimensions |
Width: 445mm
Height: 130mm
Depth: 340mm |
|
The AUDIOLAB 8000X7
7x100W RMS
Bipolar junction transistors chosen for maximum linearity in terms of sustained current gain at high collector currents
For six or five channel operation you can bridge two amplifier channels for greater power output.
7 Pairs of banana plug binding posts
Selected relays with minimal crosstalk between coil and contacts have been used
An instantaneous overload protection system monitors the current and voltage conditions
Uses an advanced loop stabilisation concept called Cascode Compensation
Audio Refinement
回上一頁
回主選單